JEE Main 2017 Physics Paper

Some energy levels of a molecule are shown in the figure. The ratio of the wavelengths r = $\lambda_{1}/\lambda_{2}$, is given by:

In the given circuit diagram when the current reaches steady state in the circuit, the charge on the capacitor of capacitance C will be:

A capacitance of 2 $\mu$F is required in an electrical circuit across a potential difference of 1.0 kV. A large number of 1 $\mu$F capacitors are available which can withstand a potential difference of not more than 300 V. The minimum number of capacitors required to achieve this is:

When a current of 5 mA is passed through a galvanometer having a coil of resistance 15$\Omega$, it shows full scale deflection. The value of the resistance to be put in series with the galvanometer to convert it into a voltmeter of range 0 – 10V is:

In the given circuit, the current in each resistance is:

Which of the following statements is false?

An electron beam is accelerated by a potential difference V to hit a metallic target to produce X– rays. It produces continuous as well as characteristic X-rays. If $\lambda$min is the smallest possible wavelength of X-ray in the spectrum, the variation of log$\lambda$min with log V is correctly represented in:

A particle A of mass m and initial velocity v collides with a particle B of mass m/2 which is at rest. The collision is head on, and elastic. The ratio of the de-Broglie wavelengths $\lambda_A$ to $\lambda_B$ after the collision is:

In a coil of resistance 100 $\Omega$, a current is induced by changing the magnetic flux through it as shown in the figure. The magnitude of change in flux through the coil is:

An electric dipole has a fixed dipole moment $\vec{p}$, which makes angle $\theta$ with respect to x-axis. When subjected to an electric field $\vec{E}_1 = E\hat{i}$, it experiences a torque $\vec{T}_1 = \tau\hat{k}$. When subjected to another electric field $\vec{E}_2 = \sqrt{3}E_1\hat{j}$ it experiences a torque $\vec{T}_2 = -\vec{T}_1$. The angle $\theta$ is:

The variation of acceleration due to gravity $g$ with distance d from centre of the earth is best represented by (R = Earth’s radius):

A body of mass m = 10–2 kg is moving in a medium and experiences a frictional force F = –kv2. Its initial speed is v0 = 10 ms–1. If, after 10 s, its energy is $\frac{1}{8}mv_0^2$, the value of k will be:

A magnetic needle of magnetic moment 6.7 $\times$ 10−2 A m2 and moment of inertia 7.5 $\times$ 10−6 kg m2 is performing simple harmonic oscillations in a magnetic field of 0.01 T. Time taken for 10 complete oscillations is:

A man grows into a giant such that his linear dimensions increase by a factor of 9. Assuming that his density remains same, the stress in the leg will change by a factor of:

A body is thrown vertically upwards. Which one of the following graphs correctly represent the velocity vs time?

A radioactive nucleus A with a half life T, decays into a nucleus B. At t = 0, there is no nucleus B. At sometime t, the ratio of the number of B to that of A is 0.3. Then, t is given by:

A particle is executing simple harmonic motion with a time period T. At time t = 0, it is at its position of equilibrium. The kinetic energy – time graph of the particle will look like:

A diverging lens with magnitude of focal length 25 cm is placed at a distance of 15cm from a converging lens of magnitude of focal length 20cm. A beam of parallel light falls on the diverging lens. The final image formed is:

The moment of inertia of a uniform cylinder of length $l$ and radius R about its perpendicular bisector is $I$. What is the ratio $\frac{l}{R}$ such that the moment of inertia is minimum?

A slender uniform rod of mass M and length $l$ is pivoted at one end so that it can rotate in a vertical plane (see figure). There is negligible friction at the pivot. The free end is held vertically above the pivot and then released. The angular acceleration of the rod when it makes an angle $\theta$ with the vertical is

In a common emitter amplifier circuit using an n-p-n transistor, the phase difference between the input and the output voltages will be:

The temperature of an open room of volume 30 m3 increases from 17oC to 27oC due to the sunshine. The atmospheric pressure in the room remains 1 $\times$ 105 Pa. If Ni and Nf are the number of molecules in the room before and after heating, then Nf – Ni will be:

CP and Cv are specific heats at constant pressure and constant volume respectively. It is observed that

CP – Cv = a for hydrogen gas

CP – Cv = b for nitrogen gas

The correct relation between a and b is

A copper ball of mass 100 gm is at a temperature T. It is dropped in a copper calorimeter of mass 100 gm, filled with 170 gm of water at room temperature. Subsequently, the temperature of the system is found to be 75oC. T is given by: (Given: room temperature = 30oC, specific heat of copper = 0.1 cal/gmoC)

An external pressure P is applied on a cube at 0oC so that it is equally compressed from all sides. K is the bulk modulus of the material of the cube and $\alpha$ is its coefficient of linear expansion. Suppose we want to bring the cube to its original size by heating. The temperature should be raised by:

The following observations were taken for determining surface tension T of water by capillary method:

diameter of capillary, D = 1.25 $\times$ 10-2 m

rise of water, h = 1.45 $\times$ 10-2m

Using g = 9.80 m/s2 and the simplified relation T = $\frac{rhg}{2} \times 10^{3}\text{ N/m}$, the possible error in surface tension is closest to:

An observer is moving with half the speed of light towards a stationary microwave source emitting waves at frequency 10 GHz. What is the frequency of the microwave measured by the observer? (speed of light = 3 ×108 ms–1)

In a Young’s double slit experiment, slits are separated by 0.5 mm, and the screen is placed 150 cm away. A beam of light consisting of two wavelengths, 650 nm and 520 nm, is used to obtain interference fringes on the screen. The least distance from the common central maximum to the point where the bright fringes due to both the wavelengths coincide is

A time dependent force F = 6t acts on a particle of mass 1 kg. If the particle starts from rest, the work done by the force during the first 1 sec. will be: