The part of the transistor which is heavily doped to produce large number of majority carriers is (a) emitter (b) base (c) collector (d) any of the above depending upon the nature of transistor

Answer: (a). The emitter's job is to supply majority carriers into the base. So it is the most heavily doped region, in both n-p-n and p-n-p transistors. So the answer is (a) emitter.

The part of the transistor which is heavily doped to produce large… | NEET 1993 (AIPMT)

Q128NEET 1993 · AIPMTEasy

Junction Transistor

The part of the transistor which is heavily doped to produce large number of majority carriers is

Show answer and solution

Answer: (a)

The emitter's job is to supply majority carriers into the base.
So it is the most heavily doped region, in both n-p-n and p-n-p transistors.
So the answer is (a) emitter.

Report a mistake

More questions on Junction Transistor

To use a transistor as an amplifierNEET 1991 (AIPMT)
In a common base amplifier the phase difference between the input signal voltage and the…NEET 1990 (AIPMT)
Radiowaves of constant amplitude can be generated withNEET 1989 (AIPMT)
An n-p-n transistor can be considered to be equivalent to two diodes connected. Which one…MHT CET 2026 (13 May, Shift 1)
In a transistor, comparing the doping of emitter, base and collector, the part which is…MHT CET 2026 (19 Apr, Shift 2)
For a transistor, the current ratio αDC = 69/70. The current gain βDC isMHT CET 2026 (14 May, Shift 1)
If transistor having α = 0.9, is used in CE configuration, then for a change of 0.4 mA in…MHT CET 2026 (13 Apr, Shift 2)
In transistor amplifier, base emitter junction is forward biased and collector base…MHT CET 2026 (13 Apr, Shift 1)

Junction Transistor question from NEET 1993 (AIPMT)

More questions on Junction Transistor