To convert a galvanometer into a ammeter, one needs to connect a (a) low resistance in parallel (b) high resistance in parallel (c) low resistance in series (d) high resistance in series

Answer: (a). An ammeter must have very low resistance, so most of the current must bypass the galvanometer. This is done with a low resistance (shunt) in parallel. So the answer is (a).

To convert a galvanometer into a ammeter, one needs to connect a | NEET 1992 (AIPMT)

Q33NEET 1992 · AIPMTEasy

Moving Coil Galvanometer, Ammeter & Voltmeter

To convert a galvanometer into a ammeter, one needs to connect a

Show answer and solution

Answer: (a)

An ammeter must have very low resistance, so most of the current must bypass the galvanometer.
This is done with a low resistance (shunt) in parallel.
So the answer is (a).

Report a mistake

More questions on Moving Coil Galvanometer, Ammeter & Voltmeter

If the number of turns in the coil of a moving coil galvanometer decreases, the…MHT CET 2026 (13 Apr, Shift 1)
An ammeter has resistance R and range I. What resistance should be connected in parallel…MHT CET 2026 (13 May, Shift 2)
The value of shunt resistance that allows 5% of the main current through the galvanometer…MHT CET 2026 (12 May, Shift 1)
The current passing through the galvanometer is 4 % of the total current in the curcuit…MHT CET 2026 (17 Apr, Shift 2)
If a galvanometer is shunted by (1/n-1)th of the value of its resistance, then the…MHT CET 2026 (15 Apr, Shift 1)
A galvanometer has resistance G and range Vg. How much resistance is required to read…MHT CET 2026 (16 Apr, Shift 2)
A rectangular coil of effective area 0.04 m ² is suspended freely in a radial magnetic…MHT CET 2026 (19 May, Shift 1)
When current I is passed through galvanometer coil, it is deflected through 16°. But when…MHT CET 2026 (12 May, Shift 2)

Moving Coil Galvanometer, Ammeter & Voltmeter question from NEET 1992 (AIPMT)

More questions on Moving Coil Galvanometer, Ammeter & Voltmeter