To convert a galvanometer into a voltmeter one should connect a (a) high resistance in series with galvanometer (b) low resistance in series with galvanometer (c) high resistance in parallel wilh galvanometer (d) low resistance in parallel with galvanometer.

Answer: (a). A voltmeter must have very high resistance so it draws little current from the circuit. This is done with a high resistance in series with the galvanometer. So the answer is (a).

To convert a galvanometer into a voltmeter one should connect a | NEET 2004 (AIPMT)

Q30NEET 2004 · AIPMTEasy

Moving Coil Galvanometer, Ammeter & Voltmeter

To convert a galvanometer into a voltmeter one should connect a

Show answer and solution

Answer: (a)

A voltmeter must have very high resistance so it draws little current from the circuit.
This is done with a high resistance in series with the galvanometer.
So the answer is (a).

Report a mistake

More questions on Moving Coil Galvanometer, Ammeter & Voltmeter

A galvanometer of 50 ohm resistance has 25 divisions. A current of 4 × 10 - 4 ampere…NEET 2004 (AIPMT)
To convert a galvanometer into a voltmeter one should connect aNEET 2002 (AIPMT)
To convert a galvanometer into a ammeter, one needs to connect aNEET 1992 (AIPMT)
If the number of turns in the coil of a moving coil galvanometer decreases, the…MHT CET 2026 (13 Apr, Shift 1)
An ammeter has resistance R and range I. What resistance should be connected in parallel…MHT CET 2026 (13 May, Shift 2)
The value of shunt resistance that allows 5% of the main current through the galvanometer…MHT CET 2026 (12 May, Shift 1)
The current passing through the galvanometer is 4 % of the total current in the curcuit…MHT CET 2026 (17 Apr, Shift 2)
If a galvanometer is shunted by (1/n-1)th of the value of its resistance, then the…MHT CET 2026 (15 Apr, Shift 1)

Moving Coil Galvanometer, Ammeter & Voltmeter question from NEET 2004 (AIPMT)

More questions on Moving Coil Galvanometer, Ammeter & Voltmeter