0 of 51 attemptedPick an answer to see the solution
Q1MHT CET 2026 · 20 APR · SHIFT 2Easy
Connected Bodies & Pulleys · Blocks joined by strings
Three blocks of different masses connected with inextensible string are pulled by a force F on a frictionless surface as shown in the figure. The ratio of tensions T1 to T2 is
Connected Bodies & Pulleys · Single pulley (Atwood)
An inextensible string passing over a smooth pulley connects two blocks of masses m1 and m2 (m2>m1) vertically. If the acceleration of the system is (ng), then the ratio of masses (m1m2) is
A block of mass M is lying on a horizontal frictionless surface. One end of the uniform rope of half the mass of the block is fixed to the block which is pulled in the horizontal direction by applying a force F at the other end. The tension in the middle of the rope will be
Connected Bodies & Pulleys · Single pulley (Atwood)
Three masses m1=4 kg,m2=4 kg and m3=6 kg are suspended from a fixed smooth frictionless pulley as shown in the figure below. The value of T1/T2 is
A wedge Y with mass of 10 kg and all frictionless surfaces and the inclined surface making 37∘ with horizontal. A block X with mass 2 kg is placed at the highest point of the wedge as shown in figure is at rest. At t=0 wedge ( Y) is pulled toward right with constant force (f) of 24 N. Taking the block X at rest at t=0, the time taken by it to slide down 8.8 m on the slope, while Y is on the move, is ______ s.
A small block of mass m slides down from the top of a frictionless inclined surface, while the inclined plane is moving towards left with constant acceleration a0. The angle between the inclined plane and ground is θ and its base length is L. Assuming that initially the small block is at the top of the inclined plane, the time it takes to reach the lowest point of the inclined plane is ________.
Connected Bodies & Pulleys · Block on a smooth surface or incline
A box of mass 5 kg is pulled by a cord, up along a frictionless plane inclined at 30∘ with the horizontal. The tension in the cord is 30 N. The acceleration of the box is (Take g=10 m s−2)
Two blocks of masses 6 kg and 4 kg are placed in contact with each other on a smooth surface as shown. If a force of 5 N is applied on a heavier block, the force on the lighter block is
A horizontal force 10 N is applied to a block A as shown in figure. The mass of blocks A and B are 2 kg and 3 kg respectively. The blocks slide over a frictionless surface. The force exerted by block A on block B is:
Connected Bodies & Pulleys · Blocks joined by strings
Three blocks M1,M2,M3 having masses 4 kg,6 kg and 10 kg respectively are hanging from a smooth pulley using rope 1, 2 and 3 as shown in figure. The tension in the rope 1,T1 when they are moving upward with acceleration of 2 ms−2 is __________ N (if g=10 m/s2).
Numerical answer type. Work it out, then open the answer.
Connected Bodies & Pulleys · Single pulley (Atwood)
Two identical blocks each of mass ' M ' attached to the ends of a massless inextensible string which passes over a pulley with a fixed axis as shown below. A small mass ' m ' is now placed on the block B. The acceleration with which the two blocks move together is [g = gravitational acceleration]
Connected Bodies & Pulleys · Single pulley (Atwood)
A light unstretchable string passing over a smooth light pulley connects two blocks of masses m1 and m2. If the acceleration of the system is 8g, then the ratio of the masses m1m2 is:
Connected Bodies & Pulleys · Single pulley (Atwood)
A light string passing over a smooth light pulley connects two blocks of masses m1 and m2 (where m2>m1 ). If the acceleration of the system is 2g, then the ratio of the masses m2m1 is:
Connected Bodies & Pulleys · Single pulley (Atwood)
A light string passing over a smooth light fixed pulley connects two blocks of masses m1 and m2. If the acceleration of the system is g/8, then the ratio of masses is:
As per given figure, a weightless pulley P is attached on a double inclined frictionless surfaces. The tension in the string (massless) will be (if g = 10 m/s2)
Connected Bodies & Pulleys · Block on a smooth surface or incline
Two bodies of masses m1=5 kg and m2=3 kg are connected by a light string going over a smooth light pulley on a smooth inclined plane as shown in the figure. The system is at rest. The force exerted by the inclined plane on the body of mass m1 will be: [Take g=10 ms−2]
Connected Bodies & Pulleys · Block on a smooth surface or incline
A block 'A' takes 2 s to slide down a frictionless incline of 30∘ and length 'l', kept inside a lift going up with uniform velocity 'v'. If the incline is changed to 45∘, the time taken by the block, to slide down the incline, will be approximately:
A uniform metal chain of mass m and length 'L' passes over a massless and frictionless pulley. It is released from rest with a part of its length 'l' hanging on one side and rest of its length 'L−l' is hanging on the other side of the pulley. At a certain point of time, when l=xL, the acceleration of the chain is 2g. The value of x is __________.
A system of 10 balls each of mass 2 kg are connected via massless and unstretchable string. The system is allowed to slip over the edge of a smooth table as shown in figure. Tension on the string between the 7th and 8th ball is __________ N when 6th ball just leaves the table.
Numerical answer type. Work it out, then open the answer.
Connected Bodies & Pulleys · Single pulley (Atwood)
Two masses M1 and M2 are tied together at the two ends of a light inextensible string that passes over a frictionless pulley. When the mass M2 is twice that of M1, the acceleration of the system is a1. When the mass M2 is thrice that of M1, the acceleration of the system is a2. The ratio a2a1 will be:
Three masses M=100 kg,m1=10 kg and m2=20 kg are arranged in a system as shown in figure. All the surfaces are frictionless and strings are inextensible and weightless. The pulleys are also weightless and frictionless. A force F is applied on the system so that the mass m2 moves upward with an acceleration of 2 ms−2. The value of F is:
A hanging mass M is connected to a four times bigger mass by using a string-pulley arrangement, as shown in the figure. The bigger mass is placed on a horizontal ice-slab and being pulled by 2 Mg force. In this situation, tension in the string is 5x Mg for x = ______________. Neglect mass of the string and friction of the block (bigger mass) with ice slab.
(Given g = acceleration due to gravity)
Numerical answer type. Work it out, then open the answer.
In the arrangement shown in figure a1, a2, a3 and a4 are the accelerations of masses m1, m2, m3 and m4 respectively. Which of the following relation is true for this arrangement?
Connected Bodies & Pulleys · Spring balance & spring systems
Two masses A and B, each of mass M are fixed together by a massless spring. A force acts on the mass B as shown in the figure. If the mass A starts moving away from mass B with acceleration 'a', then the acceleration of mass B will be:
Connected Bodies & Pulleys · Single pulley (Atwood)
The boxes of masses 2 kg and 8 kg are connected by a massless string passing over smooth pulleys. Calculate the time taken by box of mass 8 kg to strike the ground starting from rest. (use g = 10 m/s2)
A block of mass m slides on the wooden wedge, which in turn slides backward on the horizontal surface. The acceleration of the block with respect to the wedge is: Given m = 8 kg, M = 16 kg. Assume all the surfaces shown in the figure to be frictionless.
Connected Bodies & Pulleys · Single pulley (Atwood)
Two bodies of mass 4 kg and 6 kg are tied to the ends of a massless string. The string passes over a pulley which is frictionless (see figure). The acceleration of the system in terms of acceleration due to gravity (g) is:
A block of mass m is placed on a smooth inclined wedge ABC of inclination θ as shown in the figure. The wedge is given an acceleration ‘a’ towards the right. The relation between a and θ for the block to remain stationary on the wedge is
Connected Bodies & Pulleys · Spring balance & spring systems
Two blocks A and B of masses 3m and m respectively are connected by a massless and inextensible string. The whole system is suspended by a massless spring as shown in figure. The magnitudes of acceleration of A and B immediately after the string is cut, are respectively
Three blocks A, B and C, of masses 4 kg, 2 kg and 1 kg respectively, are in contact on a frictionless surface, as shown. If a force of 14 N is applied on the 4 kg block, then the contact force between A and B is
Connected Bodies & Pulleys · Blocks joined by strings
Three blocks with masses m, 2m and 3m are connected by strings, as shown in the figure. After an upward force F is applied on block m, the masses move upwards at constant speed v. What is the net force on the block of mass 2m? (g is the acceleration due to gravity)
Connected Bodies & Pulleys · Blocks joined by strings
Two blocks of mass M1=20 kg and M2=12 kg are connected by a metal rod of mass 8 kg. The system is pulled vertically up by applying a force of 480 N as shown. The tension at the mid-point of the rod is:
Connected Bodies & Pulleys · Single pulley (Atwood)
Two blocks of masses m and M are connected by means of a metal wire of cross-sectional area A passing over a frictionless fixed pulley as shown in the figure. The system is then released. If M = 2m, then the stress produced in the wire is:
Connected Bodies & Pulleys · Block on a smooth surface or incline
Two fixed frictionless inclined planes making an angle 30∘ and 60∘ with the vertical are shown in the figure. Two blocks A and B are placed on the two planes. What is the relative vertical acceleration of A with respect to B?
Connected Bodies & Pulleys · Spring balance & spring systems
A block of mass m is connected to another block of mass M by a spring (massless) of spring constant k. The blocks are kept on a smooth horizontal plane. Initially the blocks are at rest and the spring is unstretched. Then a constant force F starts acting on the block of mass M to pull it. Find the force on the block of mass m.
A block is kept on a frictionless inclined surface with angle of inclination ’α’. The incline is given an acceleration a to keep the block stationary. Then a is equal to
Connected Bodies & Pulleys · Single pulley (Atwood)
Two masses m1=5 kg and m2=4.8 kg tied to a string are hanging over a light frictionless pulley. What is the acceleration of the masses when left free to move? (g=9.8 m/s2)
A block of mass m is placed on a smooth wedge of inclination θ. The whole system is accelerated horizontally so that the block does not slip on the wedge. The force exerted by the wedge on the block will be (g is acceleration due to gravity)
A block of mass M is pulled along a horizontal frictionless surface by a rope of mass m. If a force P is applied at the free end of the rope, the force exerted by the rope on the block is
Connected Bodies & Pulleys · Spring balance & spring systems
A light spring balance hangs from the hook of the other light spring balance and a block of mass M kg hangs from the former one. Then the true statement about the scale reading is
Connected Bodies & Pulleys · Blocks joined by strings
Three identical blocks of masses m=2 kg are drawn by a force F=10.2 N with an acceleration of 0.6 ms−2 on a frictionless surface, then what is the tension (in N) in the string between the blocks B and C?
Connected Bodies & Pulleys · Single pulley (Atwood)
A light string passing over a smooth light pulley connects two blocks of masses m1 and m2 (vertically). If the acceleration of the system is g/8, then the ratio of the masses is
250 N force is required to raise 75 kg mass from a pulley. If rope is pulled 12 m then the load is lifted to 3 m. the efficiency of pulley system will be